We’re excited to be at another boat show in Florida! Come check out our Encore Pedal/Electric boat at the Big Boy Toyz Expo:
February 23 – 25, 2018
Charlotte Harbor Event & Convention Center
75th Taylor St, Punta Gorda, FL 33950
NOTE: Were sorry to say that we will no longer be at this boat show. We will, though, be at the upcoming Big Boys Toy Show coming up in Florida. More details to follow!! We’re starting off the 2018 New Year with yet another boat show! Come check out the Encore Pedal/Electric boat at the Charlotte County Boat Show in Florida. Specifics are as follows:
17th Charlotte County Boat Show
Date: January 11-14, 2018
Venue: Charlotte County Fairgrounds
Admission: Free admission to the public and $5 parking.
Address: 2333 El Jobean Road, Port Charlotte, FL, 33948
Hope to see you there!!
Thank you, Nancy, for the pictures you sent of your most recent 8-mile excursion on the Mallard Pedal boat in St Petersburg, FL. The Mallard was the predecessor to our Escapade Pedal boat. What a great job she has done in keeping the Mallard looking so good!
Nauticraft has for sale an original Mallard – as well as some original WaterBugs – both designed by Garry Hoyt (renowned yacht designer from Newport, Rhode Island) and built by the Harken Brothers (makers of yacht hardware). (Please reference our blog posting of March 10 which gives a further description of these boats & their history.)
We also have two fiberglass Mallard boats available for sale which were built by Nauticraft in the early years.
The Mallards are all in good operating condition. The Waterbugs will need some refurbishing and are being sold in “as is” condition. Call or E-mail us if you are interested! 231-798-8440 or firstname.lastname@example.org.
Check out Nauticraft’s “End of Season” specials! For a limited time only, we are offering a 10% discount off the price of a new boat. Be sure to reference the special when you contact us! We also have in stock several demo boats that have been discounted. These boats all come with our full 2-year warranty. You can contact us either via E-mail at: email@example.com or via phone at 231-798-8440. Note our business hours of 8:30 a.m. – 2:30 p.m., EST, Monday – Thursday. We look forward to hearing from you & selling you a boat!!
Nauticraft will have a display of the Escapade Pedal Boat at Muskegon’s 6th Annual Earth Fair Expo . It will be located at Montague High School, and is scheduled for April 22nd from 11am to 3pm. The Escapade is the boat which crossed the English Channel in record time & helped Paul Tucker make it into the Guinness Book of Records. Come check it out and visit all of the festivities!
Well – here we are. Summer has come and gone – way too quickly! Cool nights are upon us, leaves are starting to change color and soon we (northerners!) will be shoveling and plowing snow!
With all of that ahead – you may be wondering what you need to do to winterize your Nauticraft boat.
First of all, if you live in a climate that is going to freeze, you will want to take your boat out of the water. Ice can cause damage to the pedal drive system and moving ice flows may also cause the hull to become misshapen.
You will then need to drain any water which may have entered the boat during the year and accumulated between the hulls. This step is especially critical for boats that are stored in freezing weather conditions.
Drain holes for both the Encore & the Sprite can be found at the rear of the boat on the keels. These drain plugs should be removed to allow any water (this should be very minimal) to drain out. MAKE SURE TO REPLACE THE DRAIN PLUGS AFTER THIS PROCESS!
Water in the Escapade should first be pumped out via the bilge pump. A sponge can then be used to clean out any excess water in the Escapade’s bilge.
If you have an electric boat, we suggest disconnecting the battery after charging it fully and then attaching a trickle charger to protect it from becoming too depleted. If storing the battery on a concrete floor, you may want to set it on a piece of wood. This will prevent it from getting too cold and reducing storage capacity.
We highly recommend storing your boat inside. If it is necessary to store it outside, you will want to cover it tightly to keep dirt, moisture and squirrels out. Make sure that the cover is heavy enough so it won’t rip and let water inside. You will also need a support to keep the cover well above the windshield to protect it from the weight of snow accumulation.
You might want to check out the videos on our website which further describe winterizing your pedal, pedal/electric or electric boat. We think that you will find these very helpful!
It looks like spring has finally arrived! The snow is melting and thoughts are headed in the direction of getting out on the water and doing some pedaling in our boats! We thought this might be a good time to give you some cleaning tips so you are ready to hit the water when it finally thaws out!
Nauticraft boats may be cleaned with ordinary household or marine cleaners. For more stubborn stains and ground-in dirt a power washer may be used. Removal of Seats and Cushions is recommended when using a power washer. Use of abrasive cleaners is not recommended as they will scratch the surface and eventually accumulate more dirt.
For cleaning the Windshield it is recommended using mild soap and a soft cloth, and particular care, as this clear plastic will scratch easily.
The Seats are a marine grade vinyl, and it is recommended cleaning with only a mild soap and water. Household cleaners and commercial cleaning products may have potential chemical incompatibility that may affect the service life of the vinyl.
We hope this information is helpful to you!
Nauticraft Corporation, a leader in manufacturing of pedal and electric boats, is excited to be celebrating the birthday of their premier Escapade Pedal Boat. It was 1996 when Nauticraft first began building the rotomolded version (It had previously been built by Hoyt-Harken as the Mallard).
A look back at the long success of the Escapade:
In regards to developments made to the Escapade over the years….it really is basically the same boat. The same mold is used & therefore the design is the same. The material is similar though in recent years black specs have been molded in with the white material – which in turn helps to hide dirt/smudges. And the windshield arch is now removable for a more open feeling.
Escapade Customers’ Customizations: